BS 1655-1950

過程控制工業用法蘭連接自動控制閥(面至面尺寸)規范

(Specification for flanged automatic control valves for the process control industry (face-to-face dimensions))

DIN EN 60534-2-3-1998

工業過程控制閥.第2-3部分:流量.檢驗方法

(Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998)

DIN EN 60534-6-1-1998

工業流程控制閥.第6部分:調節閥門驅動的位置調節器固定用安裝細節.第1節:行程驅動上位置調節器的安裝

(Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997)

DIN EN 60534-1-1995

工業過程控制閥.第1部分:控制閥術語和一般原理

(Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987); German version EN 60534-1:1993)

DIN IEC 60534-7-1992

工業過程控制閥.第7部分:.數據表

(Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989)

DIN IEC 60534-2-4-1990

工業過程控制閥.第2部分:流通能力.第4節:內在的流動特性線和調節比例關系

(Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989)

DIN EN 60534-8-2-1994

工業過程控制閥.第8部分:噪聲問題.第2節:由通過控制閥的液力流產生的噪聲的實驗室測量

(Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993)

DIN EN 60534-8-4-1995

工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報

(Industrial-process control valves - Part 8: Noise considerations; section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994); German version EN 60534-8-4:1994)

DIN EN 60534-3-1-2000

工業過程控制閥.第3-1部分:尺寸.雙通球型直立式控制法蘭閥門的面對面尺寸和雙通球型角度控制法蘭閥門的中心

(Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 + Corrigendum 2000)

DIN 3394-3-2004

自動控制閥.第3部分:壓力為4巴及以下的0級減壓安全閥

(Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar)

DIN EN 60534-3-3-2000

工業過程控制閥.第3-3部分:尺寸.對頭焊接的對頭尺寸,兩種方式,球型,直角型控制閥門

(Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998)

DIN EN 60534-2-1-2000

工業過程控制閥.第2-1部分:流動容量.在安裝條件下流體流動的尺寸方程

(Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998)

DIN EN 1074-5-2001

供水閥門.適用性要求和適配試驗.第5部分:控制閥門

(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001)

DIN EN 12334-2001

工業閥門.鑄鐵控制閥門

(Industrial valves - Cast iron check valves; German version EN 12334:2001)

DIN EN 60534-8-3-2001

工業過程控制閥.第8-3部分:噪聲問題.控制閥空氣動力噪聲預測法

(Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000)

DIN IEC 60534-5-1984

工業過程控制閥.第5部分:標記

(Industrial-process control valves; part 5: marking)

DIN EN 60534-6-2-2001

工業過程控制閥.第6-2部分:定位器裝到控制閥上的安裝細則.旋轉傳動裝置上安裝的定位器

(Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001)

DIN EN 1349-2000

工業過程控制閥門

(Industrial process control valves; German version EN 1349:2000)

DIN EN 60534-8-1-2001

工業過程控制閥.第8部分:噪聲問題.第1節:由通過控制閥的空氣動力流產生的噪聲的實驗室測量

(Industrial-process control valves - Part 8: Noise considerations; Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:1986); German version EN 60534-8-1:2000)

DIN ISO 15407-1-2003

氣壓傳動.五氣口方向控制閥、規格18mm和26mm.第1部分:無電氣接頭的安裝面

(Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000))

DIN ISO 5599-1-1998

氣壓液動.五通方向控制閥.第1部分:不帶電連接件的安裝接口表面

(Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:1989))

DIN EN 60534-3-2-2002

工業過程控制閥.第3-2部分:尺寸.無法蘭控制閥(薄型蝶閥除外)的端面間距尺寸(IEC60534-3-2:2001)

(Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001)

IEC 60534-3-2-2001

工業過程控制閥.第3-2部分:尺寸.蝶形閥除外的轉式控制閥的端面距

(Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves)

IEC 60534-2-5-2003

工業過程控制閥.第2-5部分:流通能力.通過有段間恢復能力的多段控制閥門的流體流量的校準公式

(Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery)

IEC 60534-5-1982

工業過程控制閥.第5部分:標志

(Industrial-process control valves. Part 5 : Marking)

IEC 60534-2-1-1998

工業過程控制閥.第2-1部分:流量.安裝條件下流體流量的校準公式

(Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions)

IEC 60534-8-4-1994

工業過程控制閥.第8部分:噪聲狀態.第4節.流動產生的噪聲的預報

(Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow)

JIS B8656-2002

比例電動液壓旁通流量控制閥試驗方法

(Test methods for electro-hydraulic proportional bypass flow control valves)

JIS B8654-2002

比例電動液壓串聯型流量控制閥試驗方法

(Test methods for electro-hydraulic proportional series flow control valves)

JIS B8657-2002

比例電動液壓定向旁通流量控制閥試驗方法

(Test methods for electro-hydraulic proportional directional bypass flow control valves)

JIS B8659-2-2002

液壓傳動.電氣調節液壓控制閥門.第2部分:三路定向流量控制閥門的試驗方法

(Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves)

UL 429-1999

電動控制閥

(Electrically operated valves )

UL 753-1995

消防裝置用自動供水控制閥報警附件

(Alarm accessories for automatic water-supply control valves for fire protection service )

UL 1468-1995

防火設備用直接控制的減壓閥和壓力控制閥

(Direct acting pressure reducing and pressure restricting valves )

UL 1739-1994

消防設備用液壓控制的壓力控制閥

(Pilot-operated pressure-control valves for fire-protection service )

JIS B8655-2002

比例電動液壓串聯型定向流量控制閥試驗方法

(Test methods for electro-hydraulic proportional directional series flow control valves)

JIS B8375-3-2000

氣動液壓.五孔定向控制閥.第3部分:閥功能通訊的密碼系統

(Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions)

JIS B8375-1-2000

氣動液壓.五孔定向控制閥.第1部分:無電接頭的安裝界面

(Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector)

JIS B8357-2000

液壓傳動., , , 補償式流量控制閥.裝配面

(Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces)

JIS B8400-1-2003

氣壓傳動.尺寸為18mm-26mm的五孔定向控制閥.第1部分:無電連接件的安裝接口表面

(Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 1: Mounting interface surfaces without electrical connector)

JIS F3024-1996

造船.控制閥用艙面支座

(Shipbuilding -- Deck stands for controlling valves)

JIS B8658-1989

比例電動液壓控制閥用電力放大器規則

(Rules of electronic amplifier for electro-hydraulic control valves)

JIS B8380-2002

氣壓液動.控制閥門和其他元部件出口和控制機構的鑒定

(Pneumatic fluid power -- Identification of ports and control mechanisms of control valves and other components)

JIS B8376-1994

氣動速度控制閥

(Speed control valves for pneumatic use)

JIS B8387-2000

液壓動力.四孔調節閥門和四孔方向控制閥門.02,03,05尺寸.夾持尺寸

(Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions)

JIS B8375-2-2000

氣動液壓.五孔定向控制閥.第2部分:帶備用電接頭的安裝界面

(Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector)

JIS B8664-2001

液壓動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥.安裝表面

(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)

JIS B8659-1-2000

液壓動力.電氣調節液壓控制閥門.第1部分:四路直流控制閥門的試驗方法

(Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves)

JIS B2007-1993

工業過程控制閥.檢驗和常規試驗

(INDUSTRIAL-PROCESS CONTROL VALVES - INSPECTION AND ROUTINE TESTING)

ISO 10770-2-1998

液壓傳動.電模式液壓控制閥.第2部分:三向流動控制閥的試驗方法

(Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves)